• NOTE: THE ADAPTER NEEDS TO BE USED WITH OTHER DIAGNOSTIC SOFTWARE. THE SOFTWARE DOES NOT INCLUDE! The ENET WiFi interface is diagnostic/ coding/ flashing Ethernet adapter for BMW. Compatible with E-SY-S, BimmerCode, Bootmod3, Ethernet, ISTA D, MHD, xDelete, THOR-the M Flasher, BimmerGeeks Pro-Tool ect. So you can use a variety of diagnostic software through this adapter.(THE ADAPTER NOT WORKS WITH xHP Falashtool.)
• Compatible with BMW & Mini F-series, G-series, and I-series. At the same time, the Wireless ENET WiFi Diagnostic & Tuning Adapter work with iPhone, Android, and Windows. Turn your iPhone, Android device, or Windows PC into a professional-grade diagnostic scan tool.
• Faster wireless connection: The ENET WiFi interface so much faster compared to the Bluetooth adapters. Because the Bluetooth devices over D-CAN protocol, with a speed of 0.5 Mbps. ENET WiFi connects to the vehicle ethernet network through the ZGW (Gateway) with speeds of about 100 Mbps.
• EASY to USE, PLUG & PLAY. You can hide modules or program single module if you know how to use for BMW for E-SYS, for BimmerCode, for Bootmod3, Ethernet ect. Like read and erase fault codes, read and reset airbag light faults, code ECU functions, code new or existing modules ect.
• SATISFACTION : Your ENET WiFi is supplied with a 180-day money back if you are unsatisfied for any reason, along with a 3-year repair or replace manufacturer. NOTE: Any installation problems, please feel free to contact us.
• NOTE: For iOS connect to WiFi, 1. Connect to ENET's WIFI and record the IP address and subnet mask automatically obtained by the current WIFI. 2. Change the IP address of the mobile phone's WIFI to manual setting, and fill in the previously automatically obtained IP address and subnet mask in the manual IP address setting, and turn on the cellular network. The gateway and DNS do not need to be set.